Fawaaz Husain
This was my tech fair project. The tech fair is where students go to compete to see who has the best projects and who ever wins the win prizes. For my tech fair project i 3D modeled a ping pong paddle and my partner modeled a field goal. For our back up projects we modeled a air hockey mallet , a die, a poker chip and Jenga piece. i learned how to make a tech fair template.
Ornament:
I have to 3D model an ornament for a Christmas tree. If it was for someone in your family you could 3D print it.I had to extrude a 3 inch circle then I had to create a new sketch and draw star on it and then extrude the star through the circle. I learned how to
Bird house:
For this project we had to measure the walls, back wall and the roof. then we had to cut the wood out in the exact measurements if we didn't cut the wood right then we have to start a over on that part. After we put it together. we has to paint it it took 1 day to dry. I learned how to use a drill press,miter saw and shop safety.
I had to open a file which already had the claw. I had to extrude the cylinder and make a new sketch on other model. l learned how to use planes to make sketch on models.
This was one of the easiestt project i had to do this year. The point of this project was to learn how to extrude on a surface and how to make a hole in the surface.
In this project I had to create a shell and ribs. I first had to remove a piece of the figure then create a rib. I had to add a shell and rib feature.
In this figure I had to create a sketch that can be used to create a rib feature and create a rib feature with boss geometry. I had to sketch on a plane to extrude the columns.
For this 3d model I had to create a spilt feature that splits a selected face based on a sketched profile. Create a face draft feature to add draft to selected face in a model.Create a split feature that trims a solid based on a selected reference.
This 3d model I had to create an appropriate sketch that can be used as the bend line reference for creating a ben part feature. Create a bend part feature in a model to ben existing geometry in the model.
For this 3d model I had to create a quarter,three quarter and a additional info section views using a work plane as the cutting reference. Modify the view display of the model and create a design view. Add feature to the model and test how the features impact what is stored in the design view.
In this 3d model I had to change the order of features in the model browser to obtain required geometry. Then use the end of part marker to insert a new feature at a point other than the end of the feature list.
In this 3d model I had to extrude the holes then I had to mirror it around the entire circle.
This is the finish product of my rim. I had to assembly the two parts in to each other.
In this 3d model I had to figure out what the measurements were fro the circles on the front and the back of the Lego. I had to do this model to see how precise my measurements were.
In this 3d model I had fillet the edges of the model and intrude holes and center them at the sides.
This 3d model was made to be put in the center of the rim. all I had to do was to extrude and to type a text. It was my first time typing a text in inventor. This model allows me to learn the text tool.
This 3d model is a more complex version i did earlier in the year. This 3d modeled rim used almost all of my skills and knowledge of the types of tools needed to make this rim.
This is my Christmas ornament I 3d modeled. I 3d modeled the right side first then I mirrored the other side.
This the sketch for my star ornament above. It has the dimensions of the model's right, front and top view.
This is my second ornament. It is a snowman that I made. I had to create circles on top of each other then I extruded it. I had to create a plane to sketch the arms, then a started a sketch on the extruded circles to make the buttons,nose, eyes, and mouth.
This is the sketch of the snowman ornament. It had the dimensions for the snowman's front, right and top view.
